Accessories

Equipment extras and consumables including Springs,Straps, Ropes, Cushions, Wheel bearings, Upholstery

REFORMER LONG BOX

700mm Long x 400mm Wide x 290mm High

Solid plywood construction

$350 plus Gst

REFORMER SMALL BOX

400mm Long x 340mm Wide x 100mm High

Perfect for Scooter work on Reformer and also various Wunda Chair exercises

$180 plus Gst 

REFORMER JUMP BOARD

Fits into the inside face of standing platform, and is secured by the stainless steel saddle and knobs on the inside and outside face of the Reformer. It is firmly supported by the foot bar when locked into the second position. On the backside of the jump board is a piece of  solid timber which creates a stopper and enables it to sit at the perfect height. It is padded with thin but dense foam and covered in “grippa” vinyl which has a superior grippy texture…perfect for the general feel and proprioception required for jump board work!

$350 plus Gst including fittings

REFORMER JUMP BOARD LARGE

Approximately 150mm wider and higher than the standard Jump Board. Fits into the inside face of standing platform, and is secured by the stainless steel saddle and knobs on the inside and outside face of the Reformer. It is firmly supported by the foot bar when locked into the second position. On the backside of the jump board is a piece of solid timber which creates a stopper and enables it to sit at the perfect height. It is padded with thin but dense foam and covered in “grippa” vinyl which has a superior grippy texture…perfect for the general feel and proprioception required for jump board work!

$390 Plus Gst including fittings

WEDGE CUSHION

400mm Long x 400mm Wide x 100mm High

$100 plus Gst

CUBE CUSHION

150mm Length x Width x Height

$52 plus Gst

HAND STRAPS

Hand straps for the Reformer or Trapeze Table leg springs. Also can be used on various apparatus including the Ped a Pul and Wall Unit springs. Made from strong cotton webbing stitched strongly around a stainless steel D-Ring. Sold as a pair.

$40 plus Gst per pair

REFORMER SIT UP STRAP

Sit up strap which attaches to front end of Reformer via 2 stainless steel thread lock snap hooks for safety. Used for the long and short box exercises on the Reformer. Made with a strong cotton webbing stitched to 2 stainless steel D-Rings.

$35 plus Gst

REFORMER ROPES

Replacement ropes for the Reformer. 8mm static ropes with a stitched end and finished with heat shrink. 

Sold as a pair.

$45 plus Gst per pair

STAINLESS STEEL HANDLES

Handles used on the Trapeze Table arm springs and the Ped A Pul. polished stainless steel with a strong material webbing wrapped and stitched around a D-Ring. Sold as a pair.

$50 plus Gst per pair

STAINLESS STEEL HANDLES WITH SPRINGS

Handles used on the Trapeze Table arm springs and the Ped A Pul. polished stainless steel with a strong material webbing wrapped and stitched around a D-Ring. Sold as a pair. Includes 2 light arm springs. Custom tensions and lengths available by order.

$50 plus Gst per pair

REFORMER HEAD REST

Replacement headrest for Reformer. Upholstered mdf base to suit PEA equipment. Other sizes can be custom made to measurements, vinyl colour and foam density.

230mm Long x 170mm Wide

$40 plus Gst (fitting extra cost if required)

REFORMER SHOULDER RESTS

Sculpted shoulder rests for the Reformer. Sold as a pair.

Approximately 170mm Long x 85mm Wide

$75 plus Gst per pair (fitting extra cost if required)

REFORMER CARRIAGE BASE

Replacement upholstered carriage base for Reformer. MDF covered with medium density foam and commercial grade vinyl. Specifications to suit PEA Reformers. Others custom sized to order.

780mm Long x 585mm Wide

$125 plus Gst (fitting extra cost if required)

TRAPEZE TABLE ROLL UP BAR

Solid Timber Dowel roll up bar for Trapeze Table. Has 2 stainless steel eyebolts attached at either end for attachment of springs. Finished with a clear lacquer polish.

$75 plus Gst

TRAPEZE TABLE ROLL UP BAR WITH SPRINGS

Solid Timber Dowel roll up bar for Trapeze Table. Has 2 stainless steel eyebolts attached at either end for attachment of springs. Finished with a clear lacquer polish. Comes with 2 light springs. Is also used on the Wall Unit and Reformer/Trapeze Table combination.

$210 plus Gst

REFORMER SPRINGS

Highest quality galvanised springs. Choose from Heavy, Standard, Light, and Extra Light. Springs are manufactured in Australia to PEA equipment requirements. Other springs custom made to order. 

$70 plus Gst each 

TRAPEZE TABLE PUSH THROUGH BAR SPRINGS

Push through bar springs to suit PEA Trapeze Table. Comes with stainless steel snap hooks on both ends. Sold as a pair. Other custom spec springs can be made to order. Our galvanised springs are manufactured in Australia to the highest standard. 

$140 plus Gst per pair

WUNDA CHAIR SPRINGS

Standard heavy springs for the PEA standard and split pedal Wunda Chair. Lighter springs can be ordered and custom size springs can be made for an existing chair as well.

$140 plus Gst per pair

REFORMER WHEEL BEARINGS

Replacement bearings for Reformer wheels. Comes in a set of 8.

To suit an 8mm diameter fixing bolt.

$20 plus Gst (per set of 8)

REFORMER PULLEY

Replacement pulley for Reformer ropes.

$43 plus Gst each

REFORMER CLEAT (ROPE HOLDER)

Replacement cleat  for Reformer carriage. To suit up to 8-10mm diameter rope.

$36 plus Gst each

Start typing and press Enter to search

Baby Arcreformer